home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Arsenal Files 4
/
The Arsenal Files 4 (Arsenal Computer).ISO
/
ra_qbbs
/
gcu102.exe
/
GE2RA.CTL
< prev
next >
Wrap
Text File
|
1995-01-17
|
7KB
|
127 lines
; Sample configuration file for GEcho 2 Remote Access
; same Ctl as i use on my system
;
; Last revised: 10-01-1995 WV
; Lines starting with a semicolon are comments. Blank lines will
; also be ignored.
; Part 1 the security levels ***********************************************
; Group '-' is the default group and will be used if no other group is found,
; the position in the Ctl is relevant!!!, so do not change the colloms only
; the information in it. Always set group '-' otherwise you could get one
; big mess in your message area file.
; Areatype: 0 Normal Echo/Netmail
; 1-200 Internet Email HMB Board, Area type will be set to newsgroup
; The maximum security in RA 2.0x is 65535, this will be adjusted to 64000
; if you use RA 1.11.
; GE-GR SYS-SEC USER USER RA Alt1 Alt2 Alt3 All Start Area
; GROUP READ WRITE GROUP GROUP GROUP GROUP GROUPS JAM Area Type
Group - 65535 65535 65535 65535 0 0 0 No 0 0 { Default group }
Group A 65535 100 100 1 0 0 0 No 0 0 { Fido Nl }
Group B 65535 100 100 2 0 0 0 No 0 0 { Fido Intl }
Group C 65535 64000 64000 3 0 0 0 No 0 0 { Fido sysop Nl }
Group D 65535 64000 64000 4 0 0 0 No 0 0 { Fido Sysop Intl }
Group E 65535 64000 64000 5 0 0 0 No 0 0 { D.I.S.P. ß Echo's }
Group F 65535 100 100 6 0 0 0 No 0 0 { }
Group G 65535 100 100 7 0 0 0 No 0 0 { Game Net }
Group H 65535 64000 64000 8 0 0 0 No 300 0 { Game Net Sysops }
Group I 65535 100 100 9 0 0 0 No 0 0 { }
Group J 65535 100 100 10 0 0 0 No 0 0 { GRONet }
Group K 65535 100 100 11 0 0 0 No 0 0 { }
Group L 65535 100 100 12 0 0 0 No 0 0 { Quazi Net Sysop }
Group M 65535 64000 64000 13 0 0 0 No 0 0 { }
Group N 65535 100 100 14 0 0 0 No 0 0 { }
Group O 65535 100 100 15 0 0 0 No 350 0 { Quazi Net }
Group P 65535 100 100 16 0 0 0 No 0 0 { VirNet Sysop }
Group Q 65535 100 100 17 0 0 0 No 0 0 { VirNet }
Group R 65535 64000 64000 18 0 0 0 No 0 0 { }
Group S 65535 100 100 19 0 0 0 No 0 0 { ONSNet }
Group T 65535 64000 64000 20 0 0 0 No 0 0 { TechNet Host/Hub/Moder}
Group U 65535 64000 64000 21 0 0 0 No 0 0 { TechNet Sysops }
Group V 65535 100 100 22 0 0 0 No 0 0 { TechNet International }
Group W 65535 100 100 23 0 0 0 No 0 0 { TechNet National }
Group X 65535 100 32000 24 0 0 0 No 0 0 { TechNet Internet }
Group Y 65535 10 10 25 0 0 0 No 0 0 { Local boards }
Group Z 65535 64000 64000 26 0 0 0 No 0 0 { (co)Sysop Only }
; Part 2 the flag settings ******************************************
; Also set the security level if you used the Flags option, otherwise it will
; be ignored!!!
; For the flags the same conventions are used as in Remote access, e.g.:
; X : Flag must be SET to access this area
; - : Flag doesn't matter can be ON or OFF ( 'X' or '-')
; O : Flag may NOT be SET to access this area
; GRP READ_A READ_B READ_C READ_D WRITE_A WRITE_B WRITE_C WRITE_D
Flags - -------- -------- -------- -------- -------- -------- ------- --------
SysopFlags -------- -------- ------- --------
; Part 3 general options ***************************************************
; Stripfirst <description part>
; Strips the <description part> from the beginning of a areaname (case
; insensitive), up to 10 lines. Only used with the 'DESCRIPTION' parameter
Stripfirst [ONS]
Stripfirst [LOK]
Stripfirst [TEC]
; With following option you set a maximum of 20 different settings for
; specific areas,
; Areatag <DefaultGrp> <Alt1> <Alt2> <Alt3> <All> <Users> <Attribute>
; Users : REAL = Real names only
; HANDLE = Handles only
; PICK = Pick an alias
; Attributes: --------
; ||||||| /- Internet Email board
; |||||| /-- Public
; ||||| /--- Private
; |||| /---- Echoinfo
; ||| /----- Combined
; || /------ Attaches
; | /------- SoftCr's
; /-------- Allow Delete
; AreaTag Grp Alt1 Alt2 Alt3 All Users Attributes Read Write
Areatag COMMENTS 25 0 0 0 No Real XXXX-X-- 10 10 {Delete, SoftCR's, Attaches, Combined, Private}
Areatag USER2USER 25 0 0 0 No Pick -XXXX-X- 10 10 {SoftCr's, Echoinfo, Combined, Echoinfo,Public}
Areatag ONSNET_NETMAIL 25 19 0 0 No Real X----X-- 10 10 {Delete, Private}
Areatag FIDO_NETMAIL 1 25 0 0 No Real X----X-- 10 10 {Delete, Private}
Areatag TECHNET_NETMAIL 23 25 0 0 No Real X----X-- 10 10 {Delete, Private}
Areatag INTERNET_EMAIL 26 0 0 0 No Real X----X-X 10 10 {Delete, Private, Internet Email}
Areatag TEST_AREA 26 0 0 0 No Real -------- 65535 65535
Areatag ES-SUPPORT 26 0 0 0 No Real -XX--X-- 50 100 {SoftCR's, Attaches, Private}
; With the following parameter you can set the path to your MESSAGES.RA
; if not used then systempath will be used.
; Messagepath c:/bp/ge2im
; If GE2RA can't find your CONFIG.RA then you could set the following option
Systempath D:/RA/NODE1
; With the following option you can tell GE2RA to exclude certain message
; groups to be converted to RA. (do not put spaces between the groups!!)
; This option overrules al previous settings you made with Group, Flags,
; Areatag etc.
; Excludegroups CDZ
; eof - GE2RA.Ctl